Gmrp - D-Link DES-3624 Series User Manual

Stackable NWay Ethernet Switch User's Guide
Figure 7-33. 802.1Q Static VLANs --- Edit window
To configure an 802.1Q VLAN entry, enter a VLAN ID number and VLAN Name in the first two fields. Next,
select the desired Switch. Finally, check Tag for each member port you wish to be a tagging port. None should
be checked if you don't want a port to belong to a VLAN. Check Egress to statically set a port to belong to a
VLAN. Checking Forbidden prevents the port from joining a VLAN dynamically as well as defining the port
as a non-member. Click Apply to let the changes take effect.

GMRP

This section features three parts: GMRP Settings, Port GMRP Settings, and Static Multicast
Forwarding. See below for further detail.
138 Web-Based Network Management