D-Link DES-3624 Series User Manual page 76

The fields you can set are:
♦ VID Enter a VLAN ID from 1 to 4094 and hit <Enter>. This is the VLAN that will be defined on this
screen.
♦ VLAN Name Description of the VLAN.
♦ Tag/Untag Toggle between T for tag and U for untag for each port.
♦ Egress/Forbidden/Non-member (–) Position the cursor over the dash "–" representing the appropriate
port number and press <space bar> to select E for Egress membership, or leave the dash "– ". An E
designates the specified port as a static member of the VLAN. A dash means the port is not given VLAN
membership for the VID entered above.
Choose Browse existing 802.1Q VLANs at the bottom of the 802.1Q Static VLAN Settings screen to
access the following screen:
80
Figure 6-40. 802.1Q Static VLAN Settings screen
Stackable NWay Ethernet Switch User's Guide
Using the Console Interface