Defining Queue Settings - D-Link DES-3010FA Web User Manual

D-Link DES-3010FA/GA User Guide

Defining Queue Settings

The Queue Page contains fields for defining the QoS queue forwarding types. To set the queue settings:
1. Click Basic Setup > Quality of Service > General Settings > Queue. The Queue Page opens.
Figure 122:Queue Page
The Queue Page contains the following fields:
•
Strict Priority — Specifies whether traffic scheduling is based strictly on the queue priority.
•
WRR — Assigns WRR weights to queues. This field is enabled only for queues in WRR queue mode. If a
queue is set to 0 weight, the queue is not operational and is effectively closed. Each queue has a weight
range, queues 1-3 have the range 0-255, and queue 4 has the range 1-255.
2. Select Strict Priority or WRR Fields.
3. Click . The queue settings are set, and the device is updated.
Page 190