Viewing The Rmon History Table - D-Link DES-3010FA Web User Manual

D-Link DES-3010FA/GA User Guide

Viewing the RMON History Table

The RMON History Table Page contains interface specific statistical network samplings. Each table entry repre-
sents all counter values compiled during a single sample. To view the RMON History Table:
1. Click Advanced Setup > RMON > History > History Table. The RMON History Table Page opens.
Figure 153:RMON History Table Page
The RMON History Table Page contains the following fields:
•
History Entry No. — Displays the entry number for the History Control Table page.
•
Owner — Displays the RMON station or user that requested the RMON information. The field range is 0-20
characters.
•
Sample Number— Indicates the sample number from which the statistics were taken.
•
Drop Events — Displays the number of dropped events that have occurred on the interface since the device
was last refreshed.
•
Received Bytes (Octets) — Displays the number of octets received on the interface since the device was
last refreshed. This number includes bad packets and FCS octets, but excludes framing bits.
•
Received Packets — Displays the number of packets received on the interface since the device was last
refreshed, including bad packets, Multicast and Broadcast packets.
•
Broadcast Packets — Displays the number of good Broadcast packets received on the interface since the
device was last refreshed. This number does not include Multicast packets.
•
Multicast Packets — Displays the number of good Multicast packets received on the interface since the
device was last refreshed.
Page 238