D-Link DES-3010FA/GA User Guide
Defining VLAN Membership
The VLAN Membership Page contains a table that maps VLAN parameters to ports. Ports are assigned VLAN
membership by toggling through the Port Control settings. To define VLAN membership:
1.
Click Basic Setup > VLAN > Membership > Membership. The VLAN Membership Page opens.
Figure 61: VLAN Membership Page
The VLAN Membership Page contains the following fields:
•
VLAN ID — Displays the user-defined VLAN ID.
•
VLAN Name — Displays the name of the VLAN
•
VLAN Type— Indicates the VLAN type. The possible field values are:
–
Dynamic — The VLAN was dynamically created through GARP.
–
Static — The VLAN is user-defined.
–
Default — The VLAN is the default VLAN.
•
Port — Indicates the port membership.
•
LAG — Indicates the LAG membership.
•
Untagged (Orange) — Indicates the interface is an untagged VLAN member. Packets forwarded by the inter-
face are untagged.
•
Tagged (Blue) — Indicates the interface is a tagged member of a VLAN. All packets forwarded by the inter-
face are tagged. The packets contain VLAN information.
•
Include (Green) — Includes the port in the VLAN.
Page 110