•
Interface — Defines the interface on which the access profile is defined. The possible field values are:
–
Port — Specifies the port on which the access profile is defined.
–
LAG — Specifies the LAG on which the access profile is defined.
–
VLAN — Specifies the VLAN on which the access profile is defined.
–
Source IP Address — Defines the interface source IP address to which the access profile applies. The
Source IP Address field is valid for a subnetwork.
3.
Define the Access Profile Name, Rule Priority, Management Method, Interface, Source IP Address, Network
Mask or Prefix Length, and Action fields.
4.
Click
. The access profile is created, and the device is updated.
Page 65
Configuring Device Security
Configuring Management Security