D-Link DES-3010FA Web User Manual page 132

Notes
• All DNS servers can be selected by clicking Select All in DNS Server Table.
2. Select Enable DNS.
3. Define the Default Domain Name and Active Server fields.
4. Click . The DNS server is enabled, and the device is updated.
To add a new DNS Server:
1. Click Basic Setup > IP Configuration > Domain Name System > DNS Server. The DNS Server Page
opens.
2. Click . The Add DNS Server Page opens:
Figure 79: Add DNS Server Page
3. Define the DNS Server, DNS Server Currently Active, and Set DNS Server Active fields.
4. Click . The DNS server is added, and the device is updated.
Page 131
Configuring IP Information
Configuring Domain Name Servers