Configuring Rmon Events; Defining Rmon Events Control - D-Link DES-3010FA Web User Manual

D-Link DES-3010FA/GA User Guide
•
Jabbers — Displays the total number of received packets that were longer than 1518 octets. This number
excludes frame bits, but includes FCS octets that had either a bad Frame Check Sequence (FCS) with an
integral number of octets (FCS Error) or a bad FCS with a non-integral octet (Alignment Error) number. The field
range to detect jabbers is between 20 ms and 150 ms.
•
Collisions — Displays the number of collisions received on the interface since the device was last refreshed.
•
Utilization — Displays the percentage of the interface utilized.
2. Select an entry in the History Entry field. The Statistics are displayed.

Configuring RMON Events

This section includes the following topics:
•

Defining RMON Events Control

•
Viewing the RMON Events Logs
Defining RMON Events Control
The RMON Events Control Page contains fields for defining RMON events. To view RMON events:
•
Click Advanced Setup > RMON > Events > Events Control. The RMON Events Control Page opens.
Figure 154:RMON Events Control Page
Page 240