•
Use Default — Uses the device-generated Engine ID. The default Engine ID is based on the device MAC
address and is defined per standard as:
–
First 4 octets — first bit = 1, the rest is IANA Enterprise number.
–
Fifth octet — Set to 3 to indicate the MAC address that follows.
–
Last 6 octets — MAC address of the device.
2.
Define the Local Engine ID and Use Default fields.
3.
Click
. The SNMP global security parameters are set, and the device is updated.
Page 163
Configuring SNMP
Configuring SNMP Security