Configuring Rmon History - D-Link DES-3010FA Web User Manual

D-Link DES-3010FA/GA User Guide

Configuring RMON History

This section contains the following topics:
•
Defining RMON History Control
•
Viewing the RMON History Table
Defining RMON History Control
The RMON History Control Page contains information about samples of data taken from ports. For example, the
samples may include interface definitions or polling periods. To view RMON history information:
1. Click Advanced Setup > RMON > History > History Control. The RMON History Control Page opens.
Figure 151:RMON History Control Page
The RMON History Control Page contains the following fields:
•
History Entry No. — Displays the entry number for the History Control Table page.
•
Source Interface — Displays the interface from which the history samples were taken. The possible field
values are:
–
Port — Specifies the port from which the RMON information was taken.
–
LAG — Specifies the port from which the RMON information was taken.
•
Sampling Interval — Indicates in seconds the time that samplings are taken from the ports. The field range
is 1-3600. The default is 1800 seconds (equal to 30 minutes).
•
Samples Requested— Displays the number of samples to be saved. The field range is 1-65535. The default
value is 50.
Page 236