Using Screen And Table Options; Adding Configuration Information; Modifying Configuration Information - D-Link DES-3010FA Web User Manual
Layer 2 switch, managed 8 port 10/100base-tx with gigabit & fiber uplinks
Hide thumbs
Also See for DES-3010FA:
- Cli manual (361 pages) ,
- Cli manual (348 pages) ,
- Manual (348 pages)
Table of Contents
Advertisement
D-Link DES-3010FA/GA User Guide
Using Screen and Table Options
D-Link contains screens and tables for configuring devices. This section contains the following topics:
•
Adding Configuration Information
•
Modifying Configuration Information
•
Deleting Configuration Information
Adding Configuration Information
User-defined information can be added to specific D-Link Web Interface pages, by opening a new Add page. To
add information to tables or D-Link Web Interface pages:
1.
Open an D-Link Web Interface page.
2.
Click
. An add page opens, such as the Add SNTP Interface Page:
Figure 19: Add SNTP Interface
3.
Define the fields.
4.
Click
. The configuration information is saved, and the device is updated.
Modifying Configuration Information
1.
Open The D-Link Embedded Web Interface page.
2.
Select a table entry.
3.
Click
. A modification page, such as the IP Interface Settings Page opens:
Page 54
Advertisement
Table of Contents
Troubleshooting
