Assembly; Base And Column Assembly - StarTech.com 2MC1S-MONITOR-STAND Product Manual

Assembly

Base and Column Assembly

WARNING!
Pinch hazards! Keep hands away from any pinch points created by the mechanical components when
lowering or raising the display. Failure to do so may result in serious personal injury.
Do not over-tighten the screws. If any resistance is encountered, stop tightening.
Using the M8x20mm Screws (x2) and the 6mm Hex Key,
1.
fasten the Monitor Lift Column to Lift Column Base by
carefully driving the M8x20mm Screws through each of the
mounting holes on Lift Column Base and into the screw
holes on the Monitor Lift Column. As shown in Figure 1.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.StarTech.com/support
Figure 1
12