Warning Statements - StarTech.com 2MC1S-MONITOR-STAND Product Manual

Warning Statements

• StarTech.com Ltd. is not responsible for any property damage and/or
personal injury resulting from the installation procedures outlined in
this technical document.
• Assemble this product according to the instructions. Read the entire
manual and ensure the instructions are fully understood before
assembling and/or using this product.
• This product must be used with two monitors only that are the same
size and weight.
• Tipping Hazard! This product is freestanding and therefore prone to
tipping if mishandled, overloaded and/or setup incorrectly; it is not
suitable for touchscreen applications. Always exercise caution when
moving, mounting and unmounting the displays and when performing
any adjustments. Failure to do so could result in equipment damage
and/or personal injury.
• Always assess the product's stability, with the aid of a second
person, during and after the initial display mounting and whenever
adjustments are made.
• Do not exceed the weight capacity of this product. Overloading this
product might result in personal injury or property damage.
• The weight capacity of the monitor arm: 13.2 lb (6 kg) x 2.
• Do not allow children to climb on this product or to use this product
without proper supervision.
• This product is intended for indoor use only and should not be used
outdoors.
• Do not over-tighten the screws. If any resistance is encountered, stop
tightening.
• Assembling this product is a two-person task. Do not attempt to
assemble this product and install equipment without assistance.
• Before adding equipment to this product, ensure the product has been
properly assembled, and that the product can support the weight of
the added equipment.
• Make sure all of the equipment has been properly secured before
adjusting this product.
• Stored Energy Hazard! This product contains a spring mechanism which
can cause the mounted display to move forcibly, and quickly, upwards.
Always exercise caution when adjusting the position of, or in close
proximity to, the mounted display. Do not remove the mounted display
unless the spring mechanism is locked or rendered safe. Failure to do so
may result in property damage and/or serious personal injury.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.StarTech.com/support
3 3