Attach The Adhesive Cable Management Clips - StarTech.com 2MC1S-MONITOR-STAND Product Manual

Attach the Adhesive Cable Management Clips

Peel the adhesives backing off of one of the Adhesive Cable
12.
Management Clips. As shown in Figure 12.
Place the Adhesive Cable Management Clip onto the back
13.
of one of the Crossbars in roughly the middle and at a 90
degree angle. Apply firm pressure for 30 seconds as shown
in Figure 13.
Repeat steps 12 and 13 on the remaining Adhesive Cable
14.
Management Clip and Crossbar.
The Dual Monitor Desk Stand has been assembled.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.StarTech.com/support
30
Seconds
Figure 13
19
Figure 12