StarTech.com 2MC1S-MONITOR-STAND Product Manual page 23

Dual monitor desk stand - height adjustable column - for up to 27” monitors

Slide the Crossbar Mount, Lower into its receptacle on

the Crossbar Mount, Upper. Then, using the M6x40mm

Screw and the 5mm Hex Key with Screwdriver, fasten the

Crossbar Mount, Lower to the Crossbar Mount, Upper

by carefully driving the M6x40mm Screw through the

mounting hole on the Crossbar Mount, Lower and into the

mounting point on the Crossbar Mount, Upper. As shown

in Figure 9.

Figure 9

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.StarTech.com/support

Table of Contents

Need help?

Do you have a question about the 2MC1S-MONITOR-STAND and is the answer not in the manual?