Table of Contents
Advertisement
Stackable NWay Ethernet Switch User's Guide
Figure 6-48. Browse Address Table
To browse by MAC address, fill in the MAC address field, and then
press FIND.
To browse by port number, select the desired Switch and Module in
the respective fields, enter the number of the Port you want to
configure, and then press FIND.
The lower part of the screen is a read-only Browse Address Table that
contains the Total Addresses in Table, as well as the Switch,
Module, Port, MAC Address, and Learned status of each entry.
Use F3 to advance to the next page and F4 to return to the previous
page.
Switch History
The Network Monitoring menu allows the user to view the Switch
history. This works like a trap and event receiver except it only
captures trap/events generated by the Switch itself. For example, the
switch history includes when the system is rebooted, when a console
session is timed out, when a new link
is established, and when
configuration is saved to flash memory.
114
Using the Console Interface
Advertisement
Table of Contents
