TRENDnet TEG-S224M User Manual page 204

Max. Age Time, 41
MDI-II
Media Dependent Interface, 4
MIB's Object-Identity (OID), 33
MIB-I (RFC 1493), 7
MIB-II (RFC 1213), 7
MIB-II (RFC 1757), 7
Network Classes
Class A, B, C for Subnet Mask,
65
Network loop detection and
prevention
Spanning Tree Algorithm, 36
network meltdown, 51
network performance, 70
NICs, 45
Normal User, 57
Operating Temperature, 181
Out-of-band management and
console settings, 65
Out-of-Band/Console Setting
menu, 65
Overview of this User's Guide, x
Packet Forwarding, 34
Performance features, 5
Performing a factory reset, 121
Performing a System Reset, 120
Port Configuration menu, 70
Port Level, STA Operation Level
Designated Port, 38
Path Cost, 38
Port Priority, 38
Root Bridge, 38
Port Lock, 72
Port Priority, 41
Port Trunking, 42
Port VLAN ID numbers (PVID), 45
Power Consumption, 180
190
Stackable NWay Ethernet Switch User's Guide
Power Failure, 12
Power LED indicator, 23
Power on, 11
Prevent Unauthorized Users, 55
Protocol Parameters
Bridge Forward Delay field, 77
Bridge Hello Time field, 77
Bridge Max Age field, 77
Bridge Priority field, 77
Rack Installation, 10
RAM Buffer, 181
Read-only MIBs, Definition of, 33
Read-write MIBs, Definition of, 34
Rear Panel, 14
Resetting the Switch, 120
RJ-45 Pin Specification, 182
root port, 78
Routers, 4
RS-232 DCE console port, 29
security, 44
Segments, Network, 3
Serial Port, 66
Setting up the Switch, 63
Setup, 9
SLIP interface
out-of-band communication, 64
SLIP management, 66
SNMP Management Settings, 107–
8
SNMP Manager Configuration, 107
SNMP Manager Configuration
parameter
Status, 108
SNMP MIB II variable
sysContact, 68
system.sysLocation, 68
system.sysName, 67
Index