After the settings have been saved to NV-RAM, they will become the
default settings for the Switch, and they will be used every time it is
powered on, reset or rebooted. The only exception to this is a factory
reset, which will clear all settings and restore them to their initial
values listed in Appendix D, which were present when the Switch
was purchased.
Login On The Switch Console By
Registered Users
To log in once you have created a registered user,
1. Type in your username and press Enter.
2. Type in your password and press Enter.
3. The main menu screen will be displayed based on your
Administrator or Normal User access level or privilege.
Create/Modify User Accounts
To add or change your user password:
1. Choose Users Accounts Management from the main menu.
The following User Accounts Management menu appears:
Using the Console Interface
Stackable NWay Ethernet Switch User's Guide
57