Stackable NWay Ethernet Switch User's Guide
3. Define the VLAN itself and which ports will be members (able to
receive packets from a port that has this PVID number). At this
point, you need to designate whether a member port will be a
Tagging or Untagging member port. Defining the ports that will
be members of a VLAN, and whether they will Tag or Untag
packets is done in the 802.1Q Static VLAN Settings screen.
Choose Configure IEEE 802.1Q VLANs on the VLANs & MAC-
based Broadcast Domains Configuration screen (under
Configure VLANs & MAC-based Broadcast Domains of the
System Configuration menu) to access the IEEE 802.1Q VLANs
Configuration menu:
Figure 6-32. IEEE 802.1Q VLANs Configuration menu
Choose Configure Port Ingress Filter to access the first item on
the menu. The following screen appears:
94
Using the Console Interface