Update Interval Choose the desired setting: 5 seconds, 15
seconds, 30 seconds, 60 seconds or Suspend.
Port The selected port to be monitored.
TX frames/sec
transmitted from a selected port per second since the Switch
was last rebooted.
RX frames/sec Counts all valid frames received on the port
per second since the Switch was last rebooted.
% of Utilization This shows the percentage of available
bandwidth each port is using over the amount of time
specified by the update interval. For example, when a 10
Mbps port is relaying packets at 5 Mbps, the utilization is
50%.
Port Utilization
Figure 7-34. Port Utilization window
160
Stackable NWay Ethernet Switch User's Guide
Counts the total number of frames
Web-Based Network Management