Table of Contents
Advertisement
Stackable NWay Ethernet Switch User's Guide
Getting Started
The first step in getting started in using Web-based management for
your Switch is to secure a browser. A Web browser is a program that
allows a person to read hypertext, for example, Netscape Navigator,
4.x or later, or Microsoft Internet Explorer, 4.x or later. Follow the
installation instructions for the browser.
The second and last step is to configure the IP interface of the
Switch. This can be done manually through a console (see the
Configure IP Address section in the "Using The Console Interface"
chapter).
Management
To begin managing your Switch simply run the browser you have
installed on your computer and point it to the IP address you have
defined for the device. The URL in the address bar should read
something like: http://123.123.123.123, where the numbers 123
represent the IP address of the switch.
In the page that opens, click on the Login to TEG-S224 Manager
button:
This opens the main page in the management module.
The top of each page contains an interactive view of the Switch's
front panel. If your Switch is part of a stack, there will also be an
icon representing each Switch in the stack on the left side of this
panel. Click on the desired Switch to view that Switch's front panel.
A colored border around the Switch icon
Web-Based Network Management
121
Advertisement
Table of Contents
