Table of Contents
Advertisement
Stackable NWay Ethernet Switch User's Guide
STP Parameters Setting
Figure 7-8. STP Parameter Setting window
To configure Spanning Tree Protocol functions for the Switch or
individual ports, enter the desired information in the fields on this
screen (see the descriptions below for assistance) and then click
Apply.
The information above is described as follows:
Spanning Tree Protocol This option offers Disabled or
Enabled to implement the Spanning Tree Protocol.
Max Age: (6 . . 40 sec) The Maximum Age can be from 6 to
40 seconds. At the end of the Maximum Age, if a BPDU has
still not been received from the Root Bridge, your Switch will
start sending its own BPDU to all other switches for
permission to become the Root Bridge. If it turns out that
your Switch has the lowest Bridge Identifier, it will become
the Root Bridge.
Web-Based Network Management
133
Advertisement
Table of Contents
