TRENDnet TEG-S224M User Manual page 199

Stackable NWay Ethernet Switch User's Guide
If both the Firmware Update and Use Config File options are
enabled, the Firmware Update command will take precedence and
only the firmware file will be uploaded to the switch.
The Config image file, which contains all configuration settings and
was created by the switch is prefixed with the version number of the
runtime software to help with file management.
# Sample Config File
Code_type=PROM
Image_file="e:\3624\3624prom.tfp"
# specify IP address
Ip_addr = 10.12.19.102
# specify subnet mask
Subnet_mask = 255.128.0.0
# specify default gateway
Default_gateway = 10.254.254.253
Sample Configuration Fi le 185