Unit Verification - Circontrol WALLBOX SMART Series Installation Manual

CCL-WB2MC-SMART-TRI

8 UNIT VERIFICATION

Once all installation procedure has been performed, check points below:
1. Be careful when closing the cover all wires remain within the unit.
2. Check each plug is in proper conditions before start operation.
3. Check no abnormal noise appears while unit is charging.
4. Check all beacons indicators are lighting. Below table shows possible LED
beacon colors:
PLUG STATE BEACON COLOR
Available
Charging
Fault
26
INSTALLATION MANUAL
Green
Blue
Red
© CIRCONTROL
www.circontrol.com