Blade Installation - Casablanca Brescia Owner's Manual

Casablanca brescia ceiling fans: owners manual

Hide thumbs Also See for Brescia:

Owner's manual (22 pages)

Instructions manual (24 pages)

Owner's manual and installation manual (2 pages)

Table Of Contents

Table of Contents

INSTALLING THE BLADE/BLADE HOLDER TO FAN MOTOR

Step 8. To reach the blade holder mounting

holes in the fan motor the dummy switch

housing must be removed.

Take out the two 5-32 X

ing the dummy switch housing and remove.

Set the two (2) screws aside for the mo-

ment, they will be used in Step 13 to install

the switch housing after the blades are in-

stalled.

The dummy switch housing is used only when

shipping the fan.

Note: Save these two screws–they

will be used in Step 13.

BLADE SCREW

(4 PER BLADE)

BLADE HOLDER

(2 PER BLADE)

Step 9. Attach the blades to the blade

holders by first pressing the blade badge

into the blade, then installing the blade

holder using the four blade screws and

flat washers provided for each blade.

Using the screwdriver, tighten securely

by hand only.

Repeat for each blade assembly.

BLADE SCREW

(4 PER BLADE)

PREPARATION

" screws secur-

BLADE & BLADE HOLDER HARDWARE

SCREW