Remove Shipping Blocks - Casablanca Brescia Owner's Manual

Step 10. On the flywheel remove the four
shipping blocks by unscrewing the screws.
Discard the shipping blocks and shipping
block screws.
Step 11. Using the screws from the pack,
attach each blade/blade holder assembly to
the motor.
Using the screwdriver, tighten securely by
hand only.
Your Brescia fan is equipped with a fly-
wheel that allows for both 4 and 5
blade installation. The screw holes sur-
rounded by squares are for 4 blade
installation, while the screw holes in
circles are for 5 blade installation as
shown above.
SWITCH HOUSING
AND CAP ASSEMBLY
(INTELI•TOUCH)
Step 12. Locate the switch housing/cap
assembly and remove the two 8-32 X
screws holding the cap onto the switch
housing.
Note: Save these two screws–they
will be used in Step 16!

REMOVE SHIPPING BLOCKS

SHIPPING
BLOCKS
BLADE/BLADE HOLDER INSTALLATION
COMPLETING INSTALLATION
SWITCH HOUSING
AND CAP ASSEMBLY
(3-SPEED)
PREPARATION
3 /
8
B
RESCIA
SWITCH
HOUSING
CAP SCREW
8-32 X 3 /
8
(2)
SWITCH HOUSING
MOUNT SCREW
(REMOVED IN STEP 8)
5-32 X 9 /
32
(2)
CAP
7