Hanging The Fan; Canopy Electrical Connections; Canopy Hatch Installation - Casablanca Brescia Owner's Manual

Step 3. To hang the fan body in the
canopy, hold the fan body firmly and in-
sert the ball into the canopy opening.
Check that no wires were pinched. Ro-
tate the fan body until the slot in the
ball fits into the pin opposite the canopy
opening.
Fan Hanging Weight
is 21 lbs
Step 4a. Attach the fan wires to the ceiling fixture outlet
box wiring by placing the bare ends of the wires side by side
and then securing with a wire nut. Test that the connection
is secure by pulling on the wire nut. Connect in this order:
Step 4b.
• GREEN leads from mounting plate and fan to GROUND con-
ductor of power source. Secure with wire nut.
• WHITE wire from fan to white NEUTRAL wire in ceiling
fixture outlet box. Secure with wire nut.
• BLUE wire and BLACK power wire from fan to BLACK power
wire in ceiling outlet box. Secure with wire nut.
Step 5. Tuck the wires into the canopy
with the wire nuts pointed upwards, so
that the WHITE and BLACK wires are on
opposite sides of the canopy and all wires
are clear of the canopy opening.
Step 6. Install canopy hatch with the last
canopy screw and lock washer. To do this,
tilt the fan body away from the hatch
opening.
Using the screwdriver, tighten the screws
firmly by hand only.
Step 7. Straighten the fan, then check
to ensure that there is no movement be-
tween the canopy and ceiling or Hang-Tru
ball and top support shaft.

HANGING THE FAN

CAPPED BLUE
D1-OPTION WIRE ON
3-SPEED ONLY
FOR INDEPENDENT
LIGHT CONTROL
(SOLD SEPARATELY)

CANOPY ELECTRICAL CONNECTIONS

CANOPY HATCH INSTALLATION

Note: Write down the
Serial Number and the
model number for future
reference.
B
RESCIA
BALL
SLOT
WIRE NUT
2 BLACK WIRES
2 WHITE WIRES
3 GREEN WIRES
CANOPY
HATCH
LOCK
WASHER
CANOPY
SCREW
PIN
TILT THE
FAN TO
INSTALL
LAST
CANOPY
SCREW
5