Pause Time; Auto Redial; Check Dial Tone Before Sending; The Procedure For Specifying The Settings For Receiving - Canon Color imageCLASS MF8050Cn Basic Operation Manual

How to display the settings
[ ] → <Send/Receive Settings> → <Fax Settings> → <Send
Settings> → <ECM Sending>
Settings
(Boldface: Default settings)
Off Does not use the ECM function.
On Uses the ECM function.

Pause Time

Specify the number of seconds for a pause when [
is pressed.
For deatails on adding pauses, see "Sending a Fax Abroad
(Adding Pauses)" (→P.6-8)
How to display the settings
] → <Send/Receive Settings> → <Fax Settings> → <Send
[
Settings> → <Pause Time>
Settings
(Boldface: Default settings)
1 to 2 to 15 (seconds)

Auto Redial

Automatic redialing enables the machine to automatically
redial the recipient's fax number if the recipient cannot be
reached due to a busy line, or if a sending error occurs.
You can set the number of time or the interval for redialing.
How to display the settings
] → <Send/Receive Settings> → <Fax Settings> → <Send
[
Settings> → <Auto Redial>
Settings
(Boldface: Default settings)
Does not redial automatically.
Off When redialing manually, see "Redialing
(Manual Redialing)" (→P.6-6).
Redial Times: Specifies the number of times for
1 to 2 to15 (times) redialing.
Redial Interval:
On Specifies the interval for redialing.
2 to 99 (minutes)
Redial If Error Occurs: Specifies whether or not to redial when a
Off, On sending error occurs.

Check Dial Tone Before Sending

You can specify whether or not to redial after checking the dial
tone when sending a fax.
How to display the settings
] → <Send/Receive Settings> → <Fax Settings> → <Send
[
Settings> → <Check Dial Tone Before Sending>
Settings
(Boldface: Default settings)
Off
Does not check the dial tone.
On Redials after checking the dial tone.

The Procedure for Specifying the Settings for Receiving

Specify the settings for receiving using the following procedure.
This section describes the procedure for changing the setting
for "ECM Receiving" as an example.
Keys to be used for this operation
] (Pause)
1
Press [
2
Select <Send/Receive Settings> with [
and then press [OK].
Menu
Common Settings
Copy Settings
Memory Media Settin
Send/Receive Setting
3
Select <Fax Settings> with [
press [OK].
Send/Receive Settings
Common Settings
Fax Settings
4
Select <Receive Settings> with [
then press [OK].
Fax Settings
Basic Settings
Send Settings
Receive Settings
Fax Setup Guide
5
Select <ECM Receiving> with [
then press [OK].
Receive Settings
ECM Receiving
Incoming Ring
Remote Receiving
Manual/Auto Switch
Menu
OK
] (Menu).
...
] or [ ], and then
] or [ ], and
] or [ ], and
] or [ ],
6-19