Display Messages; Error Code; If <Incorrect Size/Setting> Appears - Canon Color imageCLASS MF8050Cn Basic Operation Manual

Display Messages

If the message appears, see the following and solve the problem.
e-Manual → Troubleshooting → Message appears

Error Code

An error code is a 3-digit code recorded as an error log when an error occurs.
You can check the code in the following locations.
• Error send report
Error codes for fax jobs • Error receive report
• Job logs in the system status screen
Error codes for print jobs • Job logs in the system status screen
For details on the reports, see the following.
e-Manual → Basic Operation → Setting the Auto Printing Reports
For details on the error code, see the following.
e-Manual → Troubleshooting → Error Code
If <Incorrect size/setting> Appears
The message appears when the paper size specified in <Drawer 1>, <Drawer 2>*, or <Multi-Purpose Tray> in the <Paper Settings>
menu is different from the size of the paper loaded in the multi-purpose tray. If the message appears, perform the following
operations.
* Cassette 2 (optional) can be used only for MF8350Cdn.
Change the <Paper Settings> menu according to the size of the loaded paper.
After canceling a job, see "Setting a Paper Size and Type" (→P.2-16), and then change <Paper Settings>.
IMPORTANT
For a print job
Check that the paper size setting is correct also in a computer.
Loading paper of the size specified in the <Paper Settings> menu
See "Loading Paper" (→P.2-9) and reload the paper specified in the <Paper Settings> menu.
Printing from the multi-purpose tray/manual feed slot
When <Register Default Set.> is set to <Off> for the multi-purpose tray, load paper in the multi-purpose tray/manual feed slot, and
then specify the size of the loaded paper correctly.
2010 01/01 02:07AM FAX
********************************************
Er ror R ep or t (S end)
***
********************************************
Send job resulted in error.
Job No. 0123
Address 0123456789
Name name
Start Time 01/01 02:07 AM
Call Length 01'15
Sheets 1
Result NG
Error code
0001
***
#18 Busy/No Signal
9-9