Changing The Default Values - Canon Color imageCLASS MF8050Cn Basic Operation Manual

Changing the Default Values

The default values of the copy are the function which is applied
when [ ] (Reset) is pressed or the power is turned ON. You
can change the default values to suit your needs.
You can register the following types of settings as the default
values.
• Quantity
• Density
• Original type
• 2-Sided
• Copy ratio
• Paper
• N on 1
• Collating
• Frame erase
• Sharpness
Keys to be used for this operation
Menu
1
Press [
2
Select <Copy Settings> with [
press [OK].
Menu
Sound Volume Control
Common Settings
Copy Settings
Memory Media Settin...
3
Make sure that <Change Defaults> is selected,
and then press [OK].
Copy Settings
Change Defaults
3-8
OK
] (Menu).
] or [ ], and then
4
Select a setting item with [
press [OK].
Change Defaults
<Apply>
No. of Copies: 1
+ -
Density: 0
Original Type: Text...
For details on the settings, see the following items.
"Selecting Copy Papers" (→P.3-3)
"Adjusting the Density" (→P.3-3)
"Selecting Image Quality (Copy)" (→P.3-4)
"2-Sided Copying (MF8350Cdn Only)" (→P.3-4)
"Enlarging/Reducing Copies" (→P.3-5)
"Multiple Documents onto One Sheet (N on 1)" (→P.3-5)
"Collating Copies" (→P.3-6)
"Erase Dark Borders and Frame Lines (Frame Erase)" (→P.3-6)
"Emphasize the Outline of an Image (Sharpness)" (→P.3-6)
5
After specifying the settings, select <Apply> with
[ ] or [ ], and then press [OK].
Change Defaults
<Apply>
No. of Copies: 1
+ -
Density: 0
Original Type: Text...
6
Press [ ] (Menu) to close the menu screen.
] or [ ], and then