Incoming Ring; Remote Receiving; Manual/Auto Switch; The Procedure For The System Settings - Canon Color imageCLASS MF8050Cn Basic Operation Manual

NOTE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Check the settings for the recipient's machine also.
The ECM function is available only when the settings for the machine
and recipient's machine are effective.
Even if the ECM function is effective
An error may occur due to the telephone line.
When the ECM function is effective
It may take time to receive documents if a problem occurs to the
telephone line.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
How to display the settings
[ ] → <Send/Receive Settings> → <Fax Settings> →
<Receive Settings> → <ECM Receiving>
Settings
(Boldface: Default settings)
Off Does not use the ECM function.
On
Uses the ECM function.

Incoming Ring

You can specify whether the external telephone rings when
<Receive Mode> is set to <Auto>.
You can also specify the number of ringing times.
How to display the settings
[ ] → <Send/Receive Settings> → <Fax Settings> →
<Receive Settings> → <Incoming Ring>
Settings
(Boldface: Default settings)
Off
Ring Times: 1 to 2 to 99
On
(times)

Remote Receiving

If connecting with an external telephone, you can switch to the
fax receiving mode immediately in the middle of the telephone
call by pressing dial buttons of a telephone and then dialing ID
number for fax receiving.
How to display the settings
] → <Send/Receive Settings> → <Fax Settings> →
[
<Receive Settings> → <Remote Receiving>
Settings
(Boldface: Default settings)
Off Disables the remote receiving function.
Remote Receive ID: Enables the remote receiving function.
On 00 to 25 to 99
You can specify an ID number for fax receiving in
(times) <Remote Receive ID>.
The telephone does not ring.
The telephone rings.
You can specify the number of ringing
times in <Ring Times>.

Manual/Auto Switch

You can configure the machine so that it starts receiving
documents after ringing for a certain time when <Receive
Mode> is set to <Manual>.
How to display the settings
] → <Send/Receive Settings> → <Fax Settings> →
[
<Receive Settings] → <Manual/Auto Switch>
Settings
(Boldface: Default settings)
Off
Incoming Ring Time: 1 to 15
On
to 99 (seconds)

The Procedure for the System Settings

Specify the system settings using the following procedure.
This section describes the procedure for changing the setting
for [Send Start Speed] as an example.
Keys to be used for this operation
Menu
1
Press [ ] (Menu).
2
Select <System Settings> with [
then press [OK].
Menu
Printer Settings
Timer Settings
Adjustment/Cleaning
System Settings
3
Select <Communications Settings> with [
[ ], and then press [OK].
System Settings
Device Information
Dept. ID Management
Network Settings
Communications Setti
Does not receive documents
automatically.
Starts receiving when the time
specified in <Incoming Ring Time>
elapsed.
OK
] or [ ], and
] or
6-21