Address Book Pin; Restrict New Destinations; Allow Driver Faxing; Restrict Sending From History - Canon Color imageCLASS MF8050Cn Basic Operation Manual

Settings
(Boldface: Default settings)
Off Does not use the Memory Lock mode.
If you set a PIN, it will be necessary to enter the
Memory Lock PIN:
PIN whenever you want to change the Memory
Seven-digit
Lock mode settings, or cancel the Memory Lock
number
mode.
You can specify whether or not to print the
Print Report:
On receive results when receiving a fax.
Off, On
You need to set also "Receive Results" to <On>.
If you specify <Set>, documents are received in
Memory Lock Time: the memory only within a specified time.
Do Not Set, Set Enter <Memory Lock Start Time> and <Memory
Lock End Time> respectively.
NOTE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Memory Lock PIN
• If you do not want to set the PIN, press [OK] without entering any
numbers.
• You cannot register the consecutive numbers that consist of only
"0" as a PIN, such as <0000000>.
• If you register the numbers that start from <0>, the PIN changes as
follows.
Example: When you enter <02> or <002>, the PIN is specified as
<0000002>.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Address Book PIN

You can specify the PIN in the Address Book
When you specify the PIN, you need to enter the registered PIN
before registering, editing, or deleting the destination.
How to display the settings
] → <System Settings> → <Restrict Sending> →
[
<Address Book PIN>
Settings
Enter 7-digit numbers.
Pressing [OK] without entering the number lifts the restriction
by PIN.

Restrict New Destinations

Restrict the destination that can be specified to the registered
one-touch keys or coded dial codes. You cannot perform the
following operations if you activate the restriction function.
• Specifying the destination using the numeric keys
• Registering the new destinations on the address book/one-
touch keys/coded dial codes
• Changing the destinations which are registered in the
address book/one-touch keys/coded dial codes
How to display the settings
[ ] → <System Settings> → <Restrict Sending> → <Restrict
New Destinations>
Settings
(Boldface: Default settings)
Off Does not perform restriction.
Performs restriction. Specifies destinations registered under the one-
On
touch keys and coded dial codes.

Allow Driver Faxing

You can specify the permission to send faxes the computers
using fax driver.
How to display the settings
] → <System Settings> → <Restrict Sending> → <Allow
[
Driver Faxing>
Settings
(Boldface: Default settings)
Off Cannot send a fax from the fax driver.
On
Can send a fax from the fax driver.

Restrict Sending from History

You can specify whether or not to restrict sending from a
history.
How to display the settings
] → <System Settings> → <Restrict Sending> → <Restrict
[
Sending from History>
Settings
(Boldface: Default settings)
Off Sending from a history is permitted.
On Sending from a history is not permitted.

Fax No. Confirmation Re-Entry

You can specify whether or not to display the screen for re-
enter the fax number when setting a destination of the
sending a fax. You can send a document after confirming the
destination is specified correctly by entering a fax number
twice.
How to display the settings
[ ] → <System Settings> → <Restrict Sending> → <Fax No.
Confirmation Re-Entry>
Settings
(Boldface: Default settings)
Off Does not display the re-entry screen.
On Displays the re-entry screen.

Restrict Sequential Broadcast

You can specify the restriction for sending a fax to multiple
recipients.
How to display the settings
] → <System Settings> → <Restrict Sending> → <Restrict
[
Sequential Broadcast>
Settings
(Boldface: Default settings)
Off
Allows you to send a fax to multiple recipients.
Confirm
Displays the confirmation screen when you send a fax to
Sequential
multiple recipients.
Broadcast
Reject Sequential
Disallows you to send a fax to multiple recipients.
Broadcast
6-23