Preparing Your Material - Omtech POLAR+ User Manual

6 Operation

6.3.2 Preparing Your Material

ONLY engrave objects that
the distance between its
surface to the top of the
laser mounting board can be
50.8 mm.
1. Place your object carefully onto the rotary
axis.
For a curved-surface object, use the adjusting
knob to adjust the supporting bracket to an
appropriate height.
2. Repeat instructions from
5.2.7 Shutdown.
Adjust the circle pulse parameter as needed during engraving.
50.8 mm
Adjusting Knob
5.2.2 Turning on Your Engraver
69
Object
to