Setting Up The Software - Omtech POLAR+ User Manual

4 Installation

4.8 Setting up the Software

1. Transfer the copy of Ruida's RDWorks and
its instruction manual from the provided USB
to your computer.
You can also download the latest version
of RDWorksV8 from Ruida's website at
w w w.rdacs.com/en
o m t e c h l a s e r . c o m / p a g e s / s o f t w a r e -
download.
For LightBurn and other software setup,
contact Customer Service, visit the OMTech
website, or see our YouTube channel.
2. D o u b l e c l i c k t h e " R D Wo r k s V 8 S e t u p
8.01.60-20211201.rar", and then "RDWorksV8
Setup8.01.60-20211201.exe" to install the
software.
The software version number
and release date may differ
depending on the engraving
machine.
3. Press ALT+M ("Model") and make sure the
model is RDC6445G.
4. Configure the manufacturer parameters.
a. Press ALT+F ("File") and select Vendor
Settings. Enter the default password
"rd8888".
or from us at w w w.
37