Texas Instruments TPS546C25EVM-1PH User Manual page 12

Software
3.2.6 Monitor
When the Monitor screen
parameters that are measured by the device. This screen provides access to:
• Graphs of V , I , V
OUT OUT
• Start and Stop Polling which turns ON or OFF the real-time display of data
• Quick access to On and Off Config
• Control pin activation and OPERATION command
• Margin control
• Clear Fault: Selecting Clear Faults clears any prior fault flags.
12 TPS546C25EVM-1PH 4V to 18V, 35A, Buck Converter with PMBus and
Telemetry Evaluation Module
(Figure 3-6) is selected, the screen changes to display real-time data of the
, P , and Temperature
IN OUT
Figure 3-6. Monitor Screen
Copyright © 2024 Texas Instruments Incorporated
www.ti.com
SLUUCZ1 – JULY 2024
Submit Document Feedback