Advanced Setup—Continued
Speaker Distance
These settings are set automatically by the Automatic
Speaker Setup function (see page 58).
With the "Speaker Distance" settings, you can specify
the distance from each speaker to the listening position.
4-8
3, 9
1
Measure and make a note of the
distance from each speaker to
the listening position.
2
Press the [RECEIVER] REMOTE
MODE button.
3
Press the [SETUP] button.
The main menu appears onscreen.
4
Use the Up and Down [q]/[w] but-
tons to select "2. Speaker
Setup", and then press [ENTER].
The "Speaker Setup" menu appears.
92
2
2. Speaker Setup
1. Speaker Settings
2. Speaker Config
3. Speaker Distance
4. Level Calibration
5. Equalizer Settings
6. THX Audio Setup
MOVE
ENTER
ENTER
RETURN
RETURN
SETUP
EXIT
5
Use the Up and Down [q]/[w] but-
tons to select "3. Speaker Dis-
tance", and then press [ENTER].
The "Speaker Distance" screen
appears.
2–3. Speaker Distance
Unit
Left
Center
Right
SurrRight
SurrBack R
SurrBack L
SurrLeft
Subwoofer
MOVE
Note:
Speakers that you set to "No" or
"None" in the Speaker Configuration
(page 89) cannot be selected.
6
Use the Up and Down [q]/[w] but-
tons to select "Unit", and then
use the Left and Right [e]/[r]
buttons to select:
feet: Select if you want to enter
distances in feet. Can be set
from 0.2 to 30 feet in 0.2-foot
steps.
meters: Select if you want to enter
distances in meters. Can be
set from 0.06 to 9 meters in
0.06-meter steps.
feet
12.0ft
Speaker A
12.0ft
12.0ft
12.0ft
12.0ft
12.0ft
12.0ft
12.0ft
VALUE
RETURN
RETURN
SETUP
EXIT
Need help?
Do you have a question about the SC886 - PR Preamplifier / Processor and is the answer not in the manual?