Connecting A Satellite, Cable, Terrestrial Set-Top Box, Or Other Video Source - Onkyo SC886 - PR Preamplifier / Processor Instruction Manual

Connecting the AV Controller—Continued

Connecting a Satellite, Cable, Terrestrial Set-top box, or Other Video Source

With this hookup, you can use your satellite or cable receiver to listen to your favorite TV programs
Hint!
via the AV controller, which is useful if your TV has no audio outputs.
Step 1: Video Connection
Choose a video connection that matches the video source ( ,
If you use connection
Step 2: Audio Connection
Choose an audio connection that matches the video source ( ,
• With connection
• To enjoy Dolby Digital and DTS, use connection
and , or
a b a
Connection
A
B
C
a
DIGITAL COAXIAL IN 3 (CBL/SAT)
b
c
b
c
A
Connect one or the other
Connection c must be assigned (see page 53)
36
, you must connect the AV controller to your TV with the same type of connection.
A
, you can listen to and record audio from the video source or listen in Zone 2 or Zone 3.
a
and .)
c
AV controller
COMPONENT VIDEO IN 3
CBL/SAT IN S
CBL/SAT IN V
CBL/SAT IN L/R
DIGITAL OPTICAL IN 2 (CD)
COAXIAL OPTICAL Y P
OUT OUT
COMPONENT VIDEO OUT
Satellite, cable, set-top box, etc.
, or , and then make the connection.
A B C )
, or ), and then make the connection.
a b c
or . (To record or listen in Zone 2 or Zone 3 as well, use
b c
Signal flow
⇐
⇐
⇐
⇐
⇐
⇐
L R
P AUDIO S VIDEO
B R
OUT OUT
Video source
Component video output
S-Video output
Composite video output
Analog audio L/R output
Digital coaxial output
Digital optical output
C C
B B
a
VIDEO
OUT