Onkyo SC886 - PR Preamplifier / Processor Instruction Manual page 68

Listening to the Radio—Continued
■ Tuning into Stations by Frequency
You can tune into AM and FM stations directly by enter-
ing the appropriate frequency.
Number
buttons
1 Press the [RECEIVER] button,
followed by the [D.TUN] button.
The [RECEIVER] button flashes.
(Actual display depends on country.)
2
Within 8 seconds, use the num-
ber buttons to enter the fre-
quency of the radio station.
For example, to tune to 87.5 (FM),
press 8, 7, 5.
Note:
While the [RECEIVER] button is flash-
ing, you cannot select another input
source with the remote controller.
68
Displaying AM/FM Radio Information
D.TUN
RECEIVER
Note:
When you select a preset with a custom name (see
page 103), its name is displayed instead of the band and
frequency.
Press the [DISPLAY] button to
display the available information.
Band Frequency
Listening mode
DISPLAY
Preset #