Basic Functions; Battery Check - Yamaha PM 5000 Owner's Manual

Digital Control Section
4
When a parameter that can be edited is selected, the
first editable parameter will appear flashing on the
display. Use the [INC] and [DEC] keys or the alpha-
numeric keypad to edit the value as required, and
then press [ENTER]. When available, the next
editable value will flash and can be edited in the
same way. To go back to the previous editable value
press the [CLEAR/EXIT] key.
NOT E
The procedure described in step 4, above, is not necessary for
parameters that are used only for confirmation (non-editable
parameters). Although some editable parameters only have a
single value while others have two or more editable values
spanning more than one display page, the basic procedure for all
is as described above (display pages are switched automatically).
You can press the [ENTER] or [CLEAR/EXIT] key a number of
times to step forward or backward to the value to be edited.
5
Repeat steps 2 through 4 to check or edit the required
parameters. When all utility operations are complete
press the [UTILITY] switch so that its indicator goes
out to exit from the utility mode and return to normal
console operation.
58

Basic Functions

Battery Check (Parameter No. U01)
The PM5000 has an internal memory backup battery that
maintains the console's scene memory, setup memory,
and time/date settings while the power is off. This
function makes it possible to check the condition of the
memory backup battery.
B A T T . C H E C K
Press [ENTER] after selecting the above display and one
of the following status messages will appear on the
parameter display:
Battery voltage OK.
O K
Battery voltage low.
L o w B a t t e r y !
No battery present.
N o B a t t e r y !
N OTE
For battery replacement, please contact your nearest qualified
Yamaha service center or personnel.