Safety And Protection Functions; Group Assign Safe; G/A Bus Assign Safe - Yamaha PM 5000 Owner's Manual

Safety and Protection Functions

This category includes a number of "recall safe"
functions that can be set to protect specific parameters
when a scene is recalled, thus maintaining the settings of
the protected parameters. There's also a solo safe
function that can prevent improper operation of the solo
system from playing havoc with the console's output by
either making it impossible to engage the solo mode, or
by preventing muting of specified input channels when
the solo mode is engaged. These settings are saved in the
console's setup memory, and are common to all scenes.
Group Assign Safe (Parameter No. U09)
This function prevents changes to input-channel mute
and VCA group assignments due to scene recall
operations, maintaining the current settings. The group
assign safe function can be applied to all mute groups
and/or all assign groups.
G R P A S N . S A F E
1
Press [ENTER] after selecting the above display and
it will become possible to select the target group:
select MUTE or VCA and press the [ENTER] key.
M U T E : O F F
V C A : O N
2
Use the [INC] and [DEC] keys to select ON
(protected – scene recall has no effect) or OFF (not
protected – scene recall will affect settings).
G/A Bus Assign Safe (Parameter No. U10)
This function prevents changes to the G/A master
module [TO ST] and [TO MONO] switch settings due to
scene recall operations, maintaining the current settings.
The G/A bus assign safe function applies to all G/A
master modules.
G / A A S N . S A F E
Press [ENTER] after selecting the above display and use
the [INC] and [DEC] keys to select ON (protected –
scene recall has no effect) or OFF (not protected – scene
recall will affect settings).
G / A S A F E : O F F
Digital Control Section
65