Yamaha PM 5000 Owner's Manual page 27

2
While the Group Mute Display Setup Mode display is showing use the [INC]/[DEC] keys to select either "BLINK"
(the muted channel [ON] switches will flash) or "STATIC" (the muted channel [ON] switches will go out).
BLINK Mode
M U T E
M O D E : B L I N K
3
Press the [ENTER] key to confirm the selection and restart in the normal mode. Press the [CLEAR/EXIT] key if you
want to restart in the normal mode without altering the previous setting.
N O T E
• This setting is retained when the console power is turned off, but is not included in the setup memory and therefore can not be saved to a CF
memory card.
• When the STATIC mode is selected the [ON] switches will still flash when PREVIEW is engaged.
• When the STATIC mode is selected pressing the group-muted channel [ON] switches will be ignored.
STATIC Mode
M U T E
M O D E : S T A T I C
Flashing Going out
25
-2