Midi Echo Back - Yamaha PM 5000 Owner's Manual

Digital Control Section
NOT E
The transmit and receive channels are not used for control change
transmission and reception (page 79). Since they are used for
NRPN and scene number INC/DEC transmission and reception,
it is necessary to set the transmit and receive channels of the
external MIDI device to match those of the PM5000.
2
Use the [INC] and [DEC] keys to set the selected
parameter as required.
3
Set the other functions as required.
82
MIDI Echo Back (Parameter No. 27)
Independently determines whether program change and
control change commands internally generated by the
PM5000 will be mixed with program change and control
change messages received at the MIDI IN connector and
transmitted via the MIDI OUT connector.
M I D I E C H O
1
Press [ENTER] after selecting the above display and
a display like the one shown below will appear. Use
the [INC] and [DEC] keys to select the required
setting, then press the [ENTER] key.
Program Change Echo
P G M E C H O : O F F
Control Change Echo
C T L E C H O : O F F
2
Use the [INC] and [DEC] keys to turn the selected
parameter ON (echo enabled) or OFF (echo
disabled).
P G M E C H O : O N
3
Set other MIDI functions as required.