DI-1162 Remote Access Router
that was applied to a specific interface, will be subjected to this default,
routing decision.
Each decision on handling packets is described below:
1.
Disable – this does not apply a default, routing decision.
2.
Forward – this allows the routing of a packet, even though it
has not met the criteria of the corresponding filter.
3.
Drop – this drops (doesn't allow routing for) a packet that has
not met the criteria for the corresponding filter.
Layer 2 Filter
The Layer 2 Filter sub-menu contains a protocol independent (data-
link layer) filter. Foreknowledge of the specific protocol used on the
interface (LAN or WANs) is needed to make effective use of this filter.
68
Configuration and Management