D-Link D DI-707P DI-707P Quick Installation Manual

Ethernet broadband router and print server


Quick Links

This product can be set up using
a current java-enabled web
browser, i.e., Internet Explorer or
Netscape Navigator.

Before You Begin

1. If you purchased this router to share your high-speed Internet connection with other
computers, you must have either an Ethernet-based Cable or DSL modem with an
established Internet account from an Internet Service Provider (ISP).
2. It's best to use the same computer that is connected to your modem for configuring
the DI-707P Broadband Router. The DI-707P acts as a DHCP server and will assign
all the necessary IP address information on your network. See Appendix at the
end of this Quick Installation Guide or the Manual on the CD-ROM for setting
each network adapter to automatically obtain an IP address.

Check Your Package Contents

If any of the above items are missing, please contact your reseller.
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
DI-707P Ethernet Broadband Router
CD-ROM (containing Manual and Warranty)
Ethernet (CAT5 UTP/Straight-Through) Cable
5V DC Power Adapter
specifications subject to change without notice. DI-707P.08082003
Router and Print Server
Using a power supply
with a different voltage
rating will damage and void
the warranty of this product.
Ethernet Broadband


Table of Contents

Summary of Contents for D-Link D DI-707P DI-707P

  • Page 1: Before You Begin

    5V DC Power Adapter If any of the above items are missing, please contact your reseller. ©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DI-707P.08082003...
  • Page 2 Connecting The DI-707P Broadband Router To Your Network First, connect the power adapter to the receptor at the back panel of the DI-707P and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation. 1.
  • Page 3: Restart Your Computer

    Restart Your Computer Connecting Additional Computers To The DI-707P Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-equipped computers to the remaining Ethernet LAN ports on the back panel of the DI-707P M1 LED – will flash consistently to indicate that the DI-707P is working properly.
  • Page 4: Using The Setup Wizard

    When you have completed the steps in this Guide, your connected network should look similar to this: Using The Setup Wizard Open your Web browser and type “” URL address box. Then press the Enter or Return key. The logon pop-up screen will appear. Type “admin”...
  • Page 5 The Setup Wizard (continued) Once you have logged in, the Home screen will appear. Click Run Wizard You will see the following screens Click Next Set up your new password. You have the option to establish a password. Click Next...
  • Page 6 The Setup Wizard (continued) Choose your time zone down list. Click Next Select your Internet Connection. You will be prompted to select the type of Internet connection for your router. If you are unsure of which setting to select, please contact your Internet Service Provider.
  • Page 7 The Setup Wizard (continued) If you selected Dynamic IP this screen will appear: (Used mainly for Cable Internet service.) Click the “Clone MAC Address” button to automatically copy the MAC address of the network adapter in your computer. You can also manually type in the MAC address.
  • Page 8: Test Internet Connection

    Your Setup is Complete! Click Restart Test Internet Connection. You will be returned to the Home tab. Click to Exit Then relaunch your Web browser (i.e., Internet Explorer or Netscape Naviga- tor), to link to your favorite Web site to test your Internet connection.
  • Page 9: Installing The Print Server Software

    APPENDIX Installing the Print Server Software Insert the installation CD-ROM into the CD- ROM drive. The following window will be shown automatically. If it is not, please run “autorun.exe” on the CD-ROM. Click Install Windows Printer Software Select your Windows operating system Wait until the following Welcome dialog appears.
  • Page 10: Configuring On Windows 98Se/Me Platforms

    Installing the Print Server Software (continued) Then, the setup program will begin to install the programs into the destination folder. When the following window is displayed. Click Finish Click After rebooting your computer, the software installation procedure is finished. Configuring on Windows 98se/Me Platforms After you finish the software installation procedure, your computer will be capable of network printing provided by the DI-707P.
  • Page 11: Configuring On Windows 2000/Xp Platforms

    Configuring on Windows 98se/Me Platforms (continued) Click on the Details tab Choose the “PRTmate: (All-in-1)” from the list attached at the Print To item. Be sure that the Printer Driver item is configured to the correct driver of your printer server. Click Port Settings Type in the IP address of the DI-707P.
  • Page 12 Microsoft Windows XP: Go to Start > right click on My Network Places > select Properties > Double-click on the Network Connection associated with the Ethernet adapter (i.e., D-Link DFE-530TX+). Click Internet Protocol (TCP/IP) Click Properties Select Obtain an IP address...
  • Page 13 Apple Macintosh OS X: Go to the Apple Menu Click on Network and Select System Preferences Select Built-in Ethernet in the show pull down menu Select Using DHCP the Configure pull down menu Click on Apply Now The IP address information, the Subnet Mask, the Router’s IP address and the Ethernet adapter address will appear...
  • Page 14 Notes...
  • Page 15 Notes...
  • Page 16: Technical Support

    Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.

This manual is also suitable for:


Table of Contents