Table of Contents
Advertisement
DI-1162 Remote Access Router
Stac Compression – this is an industry standard 4:1compression
scheme. When enabled, the router will try to use Stac compression on
the designated WAN port whenever possible. If the destination device
is not capable of using Stac compression, the two devices will still
communicate, albeit without using Stac compression. When disabled,
Stac compression will never be used on this port.
Multi-Link PPP – Enables/disables multi-link PPP on this port.
Individual WAN ports can be set to join the MLPPP bundle by
enabling Multi-Link on each port. When enabled, the port will join the
MLPPP bundle. Please note that the DI-1162 contains only one
MLPPP bundle. All ports taking part in MLPPP, even the first or
primary port which initially establishes the connection, must have
Multi-Link enabled. The lowest numbered WAN port having MLPPP
enabled is the Primary WAN Port and will not disconnect due to a
BOD Low Threshold event.
Admin[istration] Configuration
This feature allows you to define two names and passwords used to
login to the router for configuration and management, and is shown
below:
Configuration and Management
99
Advertisement
Table of Contents
