Table of Contents
Advertisement
DI-1162 Remote Access Router
These modules allow you to expand the functionality of the DI-1162 to
fulfill all your internetworking needs.
Dial on Demand
The Dial-On-Demand feature allows the DI-1162 to automatically
place a call to a remote node, via a WAN, whenever there is traffic
coming from any workstation on the LAN to that remote site.
Full Network Management
The DI-1162 incorporates SNMP (Simple Network Management
Protocol) agents and a menu-driven Network Management System
accessible via an RS-232 (console) or Telnet connection.
Security
The DI-1162 supports PAP (Password Authentication Protocol), CHAP
(Challenge Handshake Authentication Protocol), Layer 2 and IP
Filtering, and the creation of firewalls.
RIP-1/ RIP-2 Routing Protocols
The DI-1162 supports both RIP-1 and RIP-2 (Routing Information
Protocol versions 1 and 2) exchanges with adjacent routers. These
exchanges allow the DI-1162 to send and/or receive routing tables to
adjacent routers in order to streamline WAN communications.
DHCP Support
DHCP (Dynamic Host Configuration Protocol) allows the DI-1162
router to automatically assign IP addresses to computers as they enter
the network. This feature frees the network administrator from
Introduction
3
Advertisement
Table of Contents
