Table of Contents
Advertisement
DI-1162 Remote Access Router
second WAN port to place a call and add bandwidth to the WAN
connection when the BOD High Threshold is exceeded for the Add
Bandwidth Delay period. Bandwidth can also be subtracted when
WAN throughput falls below the BOD Low Threshold and Subtract
Bandwidth Delay parameters. Thus, BOD economizes MLPPP by
maintaining only the bandwidth needed.
A static implementation of MLPPP is achieved when BOD is disabled
but the WAN ports have Multi-Link enabled. In this case, when the two
WAN ports have established a connection, the router will check to see
if they are connected to the same source and whether the source
supports MLPPP. If both conditions are met, the router will
automatically bundle the two links together as an MLPPP connection.
Choosing Multi-Link PPP Configuration displays the following screen:
Items in the Multi-Link PPP Configuration window are described as
follows:
Bandwidth on Demand – Enables/disables BOD. When enabled,
BOD will manage the implementation of MLPPP using the
parameters defined in this window.
96
Configuration and Management
Advertisement
Table of Contents
