Table of Contents
Advertisement
DI-1162 Remote Access Router
WAN Sub-menu
The parameters are described below:
Description – this is a user-defined, 32-character identifier used to
name the WAN.
Modem Init String – this parameter is valid only for
asynchronous connections. It is a user input AT command string to
initialize a modem or ISDN TA attached to the WAN interface.
Please refer to your WAN device's handbook for more information
about using initialization command strings.
The default setting is for Hayes-compatible asynchronous modems
and is AT&FS0=1X1, where:
AT–
the mandatory first two characters of an AT
command string.
&F–
initializes the modem to its default settings.
S0=1– sets the modem to auto-answer.
32
Configuration and Management
Advertisement
Table of Contents
