DI-1162 Remote Access Router
Commands
Script files can perform six Commands. You can choose the
appropriate command by positioning the cursor in the Command field
and pressing <space bar> to toggle to the appropriate command. The
script commands are defined as follows:
Wait – this command waits for text defined in the Parameter field
to be transmitted by the ISP. In the above example, the router will
wait for the ISP to prompt for 'Username:'. Please note that the
parameters are case-sensitive and must be an exact match.
Transmit – Transmits the exact characters written in the
Parameter field. There are also three keywords that can be
transmitted:
^I –
Username, as defined in the Remote Network Profile
submenu.
^P –
Password, as defined in the Remote Network Profile
sub-menu.
60
Configuration and Management