DI-1162 Remote Access Router
!
Rx MPA Packets – Missed Packet. This is a count of packets
intended for the router, but at the time, the router could not receive
the packet (usually due to the temporary lack of receive buffers).
!
Rx DFR Packets – Deferred Packets. This is a count of incidents
where CRS (carrier signal lost) and COL both occur at the same
time. These two events happen simultaneously as a result of jabber
(produced by faulty networking equipment, usually NIC's).
WAN Counter Table
!
Tx Packets – the total number of valid packets transmitted by the
router since the last reset.
!
Tx Bytes – the total number of bytes transmitted by the router.
!
Tx Discard Packets – the number of packets dropped by the
router.
!
Tx Error packets – the number of invalid packets transmitted by
the router. This hardware counter shows the sum of Collisions,
Abort and Underrun packets.
Configuration and Management
107